Original Tom Shirley Products


Beauty Seal

High Gloss Polish & Preservative

For use on Chrome, Porcelain, Fiberglass and Brass

  • Durable-no solvents
  • Transparent-smooth
  • Protects & preserves fixtures
  • Tough polymer coating
  • Shines and protects desk tops & appliances
  • Resists corrosion and salt on vehicles, boats,
    trailers & buses
  • Easy spray and wipe application
 
Beauty SealTM is a blend of highly refined polymers and silicones which dries to a super slick finish. The super fine molecules penetrate even the smoothest finish, filling and sealing the pores with a protective clear coating. Even eye glasses and windows.
 
Anti-static - Resists dust & finger prints - No oils or petroleum solvents
 
Beauty SealTM is an extremely effective daily cleaner-seal for vinyl and leather chairs, vinyl roofs on cars, a sealer water proofer for tents and sunshades on boats. The more you apply the better the seal on surfaces exposed to water. Scrub resistant. Will not come off with regular cleanings.

Directions For Use

For general use of Beauty SealTM dampen a cotton cloth and apply evenly or simply spray evenly but lightly on any surface. Spread uniformly and allow to dry. For higher gloss, wipe with cloth after drying. Apply as many times as desired for better sealing.

Chrome flush valves and stainless steel trim in bathrooms should be thoroughly cleaned first with Showers-N-StuffTM, then rinsed before sealing with Beauty SealTM.
Enameled refrigerators, stoves, partitions, etc., become extremely smooth, finger print and dust resistant. Glass must be lightly buffed after seal dries. You may dilute Beauty SealTM with 3-7 parts of water for regular spray and wipe maintenance.

CAUTION: Do not apply Beauty SealTM to any surface to be walked upon. If accidentally spilled on floor or deck surface of boats, remove immediately and scrub effected area with a strong detergent.

Product Specifications

Packaged 12 x 1 Quart Cases

Item #: 2-1331

View SDS

Color: White
Fragrance: No fragrance added
Use Dilution: Ready to use
pH: 6.0-8.0
Biodegradability: Complete
Specific Gravity: 1.0

 


Safety Foam

Cleaner & Deodorizer

For Toilets & Urinals

  • Safe and easy to use
  • Brightens fixtures
  • Deodorizes as it cleans
  • Dissolves hard water rings
  • No harmful fumes

(DO NOT USE ON TUBS, SINKS, MARBLE OR GRANITE)

Directions For Use
To clean toilet, lower water level in the bowl with toilet swab using a plunging action. This exposes the hard water ring and other nastiness found in the toilet. (The mistake most people make when cleaning toilets is pouring the cleaning solution directly into the water, diluting it). After the water level is lowered, pour just enough Safety Foam (SF) on the bowl swab to wet it (1-2 oz) then apply briskly to bowl and up under the rim. The brisk action will cause the SF to foam and cling; this allows it to dissolve any mineral deposits. Let it sit; you aren’t scrubbing it off, you are letting the acids and detergents in SF do the work. On most toilets 2-5 minutes is enough time. Give it a couple swishes, then flush it down, rinsing your bowl swab.

Regular Maintenance
Lower the water level 2-3 inches and use the same method above but use less product and give it only a minute to work. This should be done every day on a heavily used bathroom such as in airports and hospitals, or once every week in your home.
 
Troubleshooting
For super heavy rings, use a pumice bar first. This will remove in minutes what SF would taken an hour to do. For heavy duty rust and stubborn hard water buildup, use 60 SecondsTM - caution, this product is used only as a last resort.
 
Helps & Caution
Always test commercial strength products before application to ensure damage won’t result.
Damage is a big problem in bathrooms. If cleaned properly bathroom fixtures will last indefinitely, but if fixtures are etched or scratched from poor cleaning habits, consider replacing the bowl or the entire fixture.
 
  • DO NOT use SF in your sinks or tubs as it will damage enamel and metal.
  • DO NOT use on natural marble, terrazzo, or granite.
  • Use rubber gloves when using SF.
  • DO NOT mix SF with Bleach or any other product, it may cause poisonous gasses.
  • DO NOT spill or place container on unprotected floor or countertops - most are not resistant to strong chemicals and can be damaged. If spilled, flush with water and ammonia solution.

Product Specifications

Packaged 12 x 1 Quart Cases

Item #: 2-122

View SDS

Color: Green
Fragrance: Cinnamon
Use Dilution: Ready to use
pH: Less than 1.0
Biodegradability: Complete
Specific Gravity: Greater than 1.0

 

 


Showers N Stuff

Acidic Detergent

Safetly Removes Mildew Stains, Soap Scum, Rust and Water Streaks from:

Shower Doors, Bath Tubs, Sinks, Fiberglass Showers, Ceramic Tile & Grouting, Aluminum & Chrome

(DO NOT USE ON MARBLE, GRANITE, OR TERRAZZO)

SHOWERS, SHOWER DOORS, TILES, FIBERGLASS & PORCELAIN:
If heavily soiled, apply full strength across large sections with brush or sponge. Allow each section to soak 2-3 minutes, then scrub with scrub brush. Rinse with cold water.
 
FOR DAILY CLEANING:
Dilute 1 part with 10-20 parts water, spray and wipe down daily. Rinse thoroughly. Same directions apply to wash basins, tubs, chrome, stainless steel, brass or copper and enameled surfaces.
 
FOR CERAMIC TILE OR KITCHEN TILE FLOORS:
Use with 4 parts water or as needed depending upon soil.
 
CAUTION NOTE:
Sometimes unglazed clay or mosaic type tile is confused with ceramic hard acid proof tile. Showers-n-StuffTM may cause damage or discoloration to other than real ceramic tile. Do not use on worn old tubs or tiles which need to be reglazed.
 

Product Specifications

Packaged 12 x 1 Quart Cases

Item #: 2-347

View SDS

Color: Blue
Fragrance: Cherry
Use Dilution: Ready to use
pH: Less than 1.0
Biodegradability: Complete
Specific Gravity: Greater than 1.0

 

 

 


Wood to Wood

Provides NATURAL protection to wood surfaces

  • A natural wood bi-product
  • Pure tree carnauba
  • No sticky “wood oils”
  • No solvents
  • Self polishing
  • Perfect for cabinets and paneling
  • Protection for imitation wood

 

WOOD TO WOOD is not like synthetic finishes which are from petroleum. It’s made with carnauba from trees in northern Brazil. The carnauba is highly refined to give NATURAL protection to wood surfaces.
 
All your wood, including varnished surfaces, may be cleaned and maintained by either spraying or wiping or wetting a small SOFT-COTTON cloth with WOOD TO WOOD and spreading with left to right strokes. Never use circular motions!
 
Several applications may be applied if desired. Allow adequate drying between applications. Buff the surface for an even higher gloss if desired. Use as often as needed to maintain and protect the beautiful natural wood finish.

If surface is oily or dirty, clean first.

Product Specifications

Packaged 12 x 1 Quart Cases

Item #: 2-1475

View SDS

Color: Beige
Fragrance: No fragrance added
Use Dilution: Ready to use
pH: 6.0-7.0
Biodegradability: Complete
Specific Gravity: Less than 1.0

 

In full partnership with Simoniz as our master distribution partner for the JanSan Industry.ACP Partners

 

All Rights Reserved. Aqua ChemPacs, LLC.